MPM489 Pressure Transducers.
Brief Introduction
The MPM489 product is a piezo-resistive pressure transmitter.
It uses a highly stable and reliable pressure sensor and special electronics to produce the transmitter, and the performance is good and reliable.
The MPM489 pressure transmitter is used for the meausrement and control of pertoleum, chmical industires, electric power, hydrology, irrigation and flow presure measurerments.
Features
- Reliable performance, easy application
- Short protection and reverse polarity protection
- Measure gauge, absolute and sealed gauge
- Intrinsic safe version, conforming to Standard ExiaⅡCT6 of GB3836.4
- Exd product conforms to Standard GB3836.2, and Exd certificate is approved. Exd sign is ExdⅡCT6
- Ship-use product conforming to CCS Rules of Classification of Sea-going Steel Ships (2006)
- CE and RoHS approved
Specification
- Pressure range: -0.1…0～0.01…100MPa
- Overpressure: 1.5 times FS or 110MPa (min. value is valid)
- Pressure type: gauge/ absolute / sealed gauge
- Process connection: M20×1.5 male waterline seal (or on your demand)
- Accuracy: 0.5％FS
- Long term stability: max. •}0.3%FS/year
- Zero thermal drift: 0.1%FS/℃(≤100kPa)；0.05%FS/℃(＞100kPa)
- Span thermal drift: 0.1%FS/℃(≤100kPa)；0.05%FS/℃(＜100kPa)
- Compensation temp.: 0～50℃
- Application temp.: -30～80℃， intrinsic safe version: -10～60℃ , EXD: -20～60℃
- Storage temp.: -40～120℃
- Power supply: 10～28VDC，intrinsic safe version supplied by safe barrier EXD: 8～28VDC
- Output signal: 4～20mADC（2-wire）， 0/1～5VDC（3-wire）
- Load: ≤（U-10）/0.02Ω（2-wire）， ≥10k（3-wire）
- Housing protection: IP65
- Electric connection: DIN43650 plug